Canor PH 2.10 is an all-tube phono preamplifier for MM and MC cartridges. It contains the minimum number of amplification steps required to apply purely passive corrections.
To remove mechanical hum, the transformer core is vacuum impregnated, and the entire transformer is encapsulated in a special anti-vibration compound. In addition, the massive, welded cover in which the transformer is located creates effective electromagnetic shielding and contributes significantly to the excellent signal-to-hum distance.
For both MM and MC
If the turntable contains two arms and an MM cartridge is installed on one with an MC cartridge on the other, they can be connected at the same time without any interference. The RCA MM or MC input is selected on the front panel using the buttons.
No global feedback
The whole connection is without any global feedback, which results in excellent sound performance, but it places extremely high demands on the selection of used electronics. The RIAA correction is passive and consists only of quality polystyrene and polypropylene capacitors. The output capacitor is also of high quality (polypropylene foil).
The use of CMT™ technology was a matter of course in designing the Canor PH 2.10 printed circuit boards. Because very small signal amplitudes are processed in the turntable preamplifier, this technology has been even more beneficial than in Canor’s other products.
• Without any global feedback, which results in excellent sound performance
• It contains the minimum number of amplification steps required to apply purely passive corrections
• Designed for both MM and MC cartridges with high variability of resistances and capacitances settings